TORQUE MULTIPLIERS
DIGITAL POWER TORQUE MULTIPLIER (DPT)

FEATURES
  • Digital Readout
  • Accuracy: ± 2% of indicated value, CW and CCW, from 10% to 100% of full scale
  • Easy Zero Adjust
  • Powered by 9 volt Battery
  • Balanced Precision Gear Train
  • Heavy Duty Pawl Ratchet For Quick and Easy Alignment
  • Side Loading Eliminated
  • Clockwise or Counterclockwise operation
  • Zero Back-Lash
  • Indicated Fastener Relaxation to Nearest Foot Pound
  • Accurate from -25 to 120 degrees Fahrenheit






Part Number TRB1200
Reaction Arm for DPT-1200

The CDI Model DPT series of torque multipliers are constructed of a two piece aluminum housing, special gear train, a stainless steel reaction device and a digital torque display. The display measures output torque directly in foot pounds when the load is reacted through the two pins on the output side of the housing. This reaction force is transferred to the electronics, which in turn sends the signal to the digital display for precise torque readings to the nearest foot pound. An adapter is required to interface with the application.

Part Number
 Capacity Incr.
Size
 Wt. Lbs. Input Output
DPT1200 0-1200 ft. lb. 1 ft. lb. 5-1/16" x
   6-5/8" x
   9-1/4"		 20 lbs. 3/8" female with
   3/8" sq. drive
   supplied		 3/4" sq. female with
   6" long 3/4" sq.
   male drive supplied
DPT2500 0-2500 ft. lb. 1 ft. lb. 8" x 11"
   x 6-1/4"		 38 lbs. 3/8" female with
   3/8" sq. drive
   supplied		 1" sq. female with
   8" long 1" sq.
   male drive supplied
1200 KIT contains carrying case, output shaft and crank handle.
2500 KIT contains carrying case, output shaft and crank handle.